The Analog Devices (ADI) ADA4077 is a high-precision, low-noise operational amplifier ideally suited for use in fibre-optic network control circuits. In this article, we will introduce the ADA4077 product features, and through practical application cases to show its advantages in the optical fibre network control circuit.

1.ADA4077 its main advantages are as follows:

Low noise: the equivalent input noise voltage is only 1.2nV/√Hz, which is suitable for fibre optic communication systems with strict noise requirements.

Low distortion: Total Harmonic Distortion (THD) + noise is only -120dBc, ensuring the purity of signal transmission.

High gain bandwidth product: The gain bandwidth product (GBW) is 8MHz, which meets the high-speed signal processing requirements of optical fibre network control circuits.

High input impedance: Input impedance is greater than 1TΩ, ensuring that the signal source is not affected by the load.

Rail-to-rail output: Output swing up to the supply voltage range to improve signal dynamic range.

Small package: MSOP-8 package to save board space.

More Details:

Unlike other amplifiers, the ADA4077-1/ADA4077-2/ADA4077-4 have MSL1-rated performance, meet stringent assembly process standards, and are rated over the -40°C to +125°C extended industrial temperature range for demanding operating environments.

ADA4077 in fibre-optic network control circuits in the application of solutions

3.ADA4077 use of ideas briefly described

(1) Signal amplification

In the optical fibre network control circuit, ADA4077 can be applied to signal amplification. Its high gain bandwidth product and low noise characteristics to ensure that the signal in the amplification process will not be distorted, while improving the signal-to-noise ratio of the signal.

(2) Filtering

Using the low distortion characteristics of the ADA4077, you can design a high-order passive filter, the signal filtering process. The filter design should be optimized according to the bandwidth and signal characteristics of the optical network to achieve the best filtering effect.

(3) Analogue Multiplexer

In the fibre optic network control circuit, multiple signals need to be selected and switched, and the high input impedance and rail-to-rail output characteristics of the ADA4077 make it suitable for analogue multiplexer design. Selection and switching of multiple signals is achieved by controlling the switches.

In conclusion, the Analog Devices ADA4077 operational amplifier has a wide range of applications in fibre optic network control circuits due to its high accuracy, low noise and high gain bandwidth product. In addition, it can also be used in process control front-end amplifiers, instrumentation, precision instrumentation sensors and control elements memory precision filters.

UCC INDU is offering this model for purchase. In addition, we offer a wide selection of ANALOG DEVICES. Welcome to visit the UCC INDU website to explore and shop for the products you need.


Disclaimer: The information provided on this page is for informational purposes only. We do not warrant the accuracy or completeness of the information and accept no liability for any loss or damage arising from the use of such information.

About Manufacturers

Subscription Email

Don't miss out on updates and special offers on our product information. Enter your email address, click subscribe and keep the inspiration and information flowing to your inbox. We promise to respect your privacy and never spam.

Sales program

News & Updates

BY25Q256FSSIG: A Detailed Introduction to High-Performance SPI NOR Flash ​Memory

2025-04-23

BY25Q256FSSIG is a 256Mbit high-speed, low-power SPI NOR Flash from BYTe Semiconductor that supports multiple SPI modes for industrial, consumer electronics and embedded storage applications.
  • Manufacturer New

High-precision isolated measurements: LEM LA 25-NP current sensors in photovoltaic inverters

2025-04-21

This paper comprehensively introduces the application of LEM LA 25-NP current sensors in PV inverters, covering its technical advantages of high accuracy, wide bandwidth and fast response, as well as signal conditioning, EMC and safety specifications, three-phase measurement solutions and typical application cases, demonstrating its excellent performance in high-efficiency MPPT, fault protection, and grid-connection safety.
  • Manufacturer New

Application of KAQY214STLD in Security System

2025-04-17

KAQY214STLD solid state relays are used in security systems to ensure power control of monitoring equipment, signal switching of alarm systems and stability of outdoor equipment due to their high isolation voltage, low on-resistance, wide operating temperature range and environmentally friendly design.
  • Manufacturer New

Exploring the Technical Potential and Application of STM32H750VBT6 in Smart Home Product Development

2025-04-15

Explore the technical potential and applications of the STM32H750VBT6 for smart home product development. High-performance Cortex-M7 core with up to 480MHz main frequency supports complex algorithms and multi-tasking. Rich peripheral interfaces for device interconnection and interoperability, and low-power design to extend the service life of devices. Hardware encryption and MPU for data security, RTOS support for optimised system performance. Learn how to use this high-performance microcontroller to build smarter, energy-efficient and secure home devices.
  • Manufacturer New

LTV-357T-C: The Outstanding Choice for Optocouplers | UCC INDU GmbH

2025-04-10

The LTV-357T-C is a high-performance transistor output optocoupler manufactured by Lite-On, featuring an isolation voltage of up to 3750Vrms, a wide current transfer ratio (50%-600%), and a fast response time (rise time of 4μs, fall time of 3μs). They are widely used in power supply circuits, signal transmission, industrial control and communication equipment, etc. UCC INDU GmbH, as a specialised electronic components trader, provides you with high-quality products and professional technical support!
  • Manufacturer New

AT42QT1010-TSHR: High-Performance Capacitive Touch Sensor Chip

2025-04-08

Explore AT42QT1010-TSHR: a high-performance capacitive touch sensor chip for consumer electronics, home appliances, industrial control and more. Learn about its high sensitivity, low power consumption and strong anti-interference capability to help upgrade smart devices
  • Manufacturer New

MCU popular science: from the basic composition to the application areas and market trends

2025-04-02

This article provides a comprehensive overview of the basic components, operating principles, classification and application areas of microcontroller units (MCUs), as well as discussing the market trends and suppliers of MCUs. It is suitable for technology enthusiasts, engineers and electronic semiconductor traders to help them better understand MCU technology and its applications in intelligent devices.
  • Company New

DDR1 DRAM (IS43Rxxx): An Important Milestone in Storage Technology

2025-03-31

Discover the significance of DDR1 DRAM (IS43Rxxx) in storage technology. UCC INDU GmbH offers ISSI's reliable solutions for industrial electronics and legacy systems. Learn about technical features, application areas, and future perspectives of this important memory technology.
  • Manufacturer New
Settings
We use cookies to offer you a better browsing experience and analyze site traffic. Read about how we use cookies and how you can control them by clicking on 'settings'.
PRODUCTS LIST